| Forum Home > EQUIPMENT AND TACKLE DISCUSSIONS > A-rig with Hard Swim baits | ||
|---|---|---|
|
Member Posts: 210 |
I busted 6 over 5lbs last Friday on an A-Rig rigged with 5X 5" Jaw Jacker Swim Baits at Lake Lochalossa in FL. Something else Ive been playing with is using hard body swim baits on it and it works VERY well rigged with 4 BBZ1 4" shads in fast sink model.. you just use 4 on the outside wires and leave the center lure-less and it will run true and you wont have them fouling each other with the trebles.. I caught 3 (2 2 1/2-3lb fish and one pushing 6)on rigged this was but only fished it about 45 minutes and the wind picked up so bad the white caps was busting over the side of the Z-9 so it was time to leave. I was fishing it on a Megabass F7-76RDti White Python with 65# Daiwa braid and a Daiwa/Megabass Monoblock Racing condition.. The rod and reel setup I was using for the one setup with hard baits was a Megabass Orochi F8-78DG Super Destruction, Daiwa Ringa HLC and 65# Daiwa Braid. I will get a Video of it in action in the water, casting it and hopefully sticking a few fish on film for you guys. | |
|
-- Please Visit http://www.wickedreelz.com and the forum http://wickedreelz.freeforums.org Fav setup right now is my Megabass F7-76RDti White Python, Megabass LIN10 I think this is the sweetest looking combo ever right now it is NASTY SICK its just to sexy to fish lol. Nitro Z-9/250 PRO XS Opti spinning a 26P Fury thats been custom worked. One person, full tank of fuel and tourney load of gear 81MPH.. 84MPH with a light load.
| ||
|
Member Posts: 191 |
I'm wondering if/when someone will come up with a spinnerbait version of the A-rig. | |
|
-- lazy slip bobberin guy
| ||
|
Site Owner Posts: 15427 |
It gets caught up, the idea is to have them as close together as possible without getting hung up. Although I imagine that small 1/4 or 1/6 Oz spinners may work in the right combinations. | |
--
| ||